Specifications - Craftsman 320.2768 Operator's Manual

NOTE: Before attempting to useyourrouter, f amiliarize yourself withallofthe
operating f eatures a ndsafety requirements.
Yourfixedbase router h asa precision-built electric motor a ndit should only
beconnected toa 120-volt, 60-Hz A Conlypower s upply (normal household
current). Donotoperate ondirect c urrent ( DC). Thislarge voltage dropwillcause
a lossofpower a ndthemotor w illoverheat. Iftherouter d oesnotoperate when
plugged i ntoa correct 1 20-volt, 60-Hz AConlyoutlet, c heck thepower s upply.
Thisrouter h asan8-ft.,2-wire power c ord(noadapter n eeded).
A_, WARNING: Do not allow familiarity with the router to cause a lack of alertness.
A fraction of a second of carelessness is enough to cause severe injury
PRODUCT SPECIFICATIONS
Rating 12.0 Amps
No Load Speed 10,000-25,000 RPM
Peak HP 2
Input 120-volt, 60Hz AC
Collets/Nuts and Cutter bit Shank Diameters 1/4 in. and 1/2 in.
Fixed Base Diameter 6 inches
Sub-Base Opening (Diameter for cutter bit use) 1-1/4 inches
Sub-Base Thickness 1/4 inch (6mm)
Fixed Base Depth of Cut 1-3/4 inches (45mm)
_h, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
This Fixed Base Router has the following features:
1.
2.
3.
4.
5.
6.
Powerful, 12.0 Amp Soft Start Motor develops 2 Peak HP to handle most
routing jobs.
Variable=Speed Motor runs at 10,000 to 25,000 RPM (no-load speed).
Speed Dial allows matching proper speed to material and bit size.
Electronic Feedback Circuitry provides soft starts for longer motor life,
maintains constant speed under load for a quality finish in all materials.
Fixed Base features Coarse and Fine Depth Adjustments for accurate
set-ups. Ideal for use with a router table, sold separately.
Spindle Lock for easy 1-wrench bit changes. Includes 1/4 inch and 1/2
inch self=releasing collets/nuts for use with a wide variety of 1/4 in. and
1/2 in. router bits, sold separately.
2768 ManuaLRevised_lI-0307 Page 13