Advertisement
Set-up / Knockdown
Procedure
1.
Be sure the saw is positioned to the extreme left on the frame and securely
tightened.
2.
Starting with the legs at the wheel end (left), depress the snap buttons to
release the legs.
3.
Carefully walk the frame and saw down to the floor while allowing the legs
to fold under. Once resting on the floor, the legs can be completely folded
to engage the snap buttons. Figure 17.
Carefully stand the unit up onto the wheeled end.
4,
5.
Depress the snap buttons on the remaining 2 legs. Fold the legs down until
they nest neatly under the frame and the snap buttons engage the frame.
Figure 18.
The stand is now ready to roll. Reverse the procedure to set the stand up
for use. Figure 19.
Figure 17
Figure 18
Figure 19
7
Advertisement
