Download Print this page

Fisher & Paykel WA37T26GW2 Installation Instructions And User Manual page 5

Hide thumbs Also See for WA37T26GW2:

Advertisement

Available languages

Available languages

+"° _
C q.....
i
nsta at
n tr, ct o
Before you begin - read these instructions
completely
and carefu[[yo
Electric
Shock
Hazard
Read and follow
the IMPORTANT
SAFETY INSTRUCTIONS
outlined
in this User Guide before
operating
this app[iance_
pages
11 - 13.
Failure
to do so can result
in death,
electric
shock, fire or injury
to persons°
Observe all governing codes and ordinances,
Installation
Requirements
Location
Your washer must be installed ors firm floorinc_ to minimize vibration during] spin cycles Concrete
flooring is best, but wood base is sufficient provkting the floor support meets FHA standards
Your washer shoukt not be installed on rugs or exposed to the weather
Your cokt water should not exceed %°F (35°C) or your hot water exceed 150°F (dS°C)
femperatures above this may dama<]eyour washer
Shut Off Valves
Both hot and cold shut off valves (faucets) should be available in the laundry area
©_ain
Water may be drained into a standpipe or set tub The standpipe must be ]/i'(38mm)
minimum
interior diameter and must be open to the atmosphere
Electrical
This appliance must be supplied with ]IOV
]2(7%60Hz electrical supply and connected to an
indivktual, properly firounded branch circuit, protected by a 15 or 20 amp circuit breaker or time
delay fuse

Advertisement

loading