Advertisement
Available languages
Available languages
Opt ons
Ct-l n 9n!9 Pre : .....
Out of Balance Recovery
Routine
When your F,:osmc;r/-T" is spipnin(t it car" sense if the wash load is out of balance ar'd will stop
and re try spinning up to _ times If the machine still senses an unbalanced load there are two
options the machine offers
Automatic
Recovery
Option:
Your f-:osmcrl:" will try to automatically
(orre(t the out of balar'_e load It will fill with
water ar'd agitate to redistribute the load
before trying to spin up again
Light on
automatic recovery
right off
machine stops
Machine
Stops Options:
Your f-:osmorl_" will stop, giving a short burst of beeps every five seconds and the RINSEor SPIN
light will flash. You must redistribute the load more evenly yoursdf (Use this option if you wish
to conserve water)
1 Enter the Option Adjustment Mode
2 Usethe REGULARbutton to select the Out of Balance Recovery Option you prefer
s PressPower to store your selection
Auto Water Fill Level
If you are not satisfied with the level that your
F,:osmcr/:" fills to ors AUTO WATERLEVEL,you
carsalter the fill level that Auto will select
If you feel there is too much water, you can
decrease the fill level that will be selected
1 Enter the Option Adjustment Mode
2 Usethe CYCLEbuttons to decrease the
amount of water selected
s PressPOWERto store your selection
Pgrm_ngnt
WOOf
Del:ca:e
Heavy
Press
Wash_l+s
D._y
Automatic
Water Level Adjustment
Note:
Heavy Duty (the deiault setting) provides the ideal water fill level If you wish to change it, we
recommend changing one setting at a time until you reach the preferred level
28
Advertisement
