Download Print this page

Fisher & Paykel WA37T26GW2 Installation Instructions And User Manual page 32

Hide thumbs Also See for WA37T26GW2:

Advertisement

Available languages

Available languages

Before
Ca For : erv ce
Pleaseread the following pages before calling for service
You can correct many of your machine's problems using the checklists on the following pages
Your machine is capable of diagnosing its own problems If it has a problem it will Deep and
display a message telling you what is wrong
f Yo, r Ecosmart 'MBeeps For Hep
Musical Series of Beeps _*Every 5 Seconds and°°°
_The beeps are the same sound your washer makes when you plug your machine
in.
Hot/aucet
has not been turned on
Inlet hose filters may be blocked.
Hot water supply is not hot enough to maintain the wash tempe/atu/e
you have sele<ted. Select a
lower wash temperature
Inlet hoses conne<ted the wrong way around.
Cold/au< et has not been ruined on_
Inlet hose filte/s may be blocked
Inlet hoses connected
the wrong way around
Cold water temperature exceeds recommended
limits.
The/aucets
have not been turned on.
Inlet hose filters may be blocked
The drain hose is too low and the water is siphoning out of the machine.
The [low rate of the supply water is too slow.
The ma(hine
is overloaded
and can not agitate. Ensure the machine is stationary. Remove items
until the remaining ones can move mole f/eely.
Select a higher water level.
The machine has a suds build up. (k}o mu(h dete/gent
may have been used for the amount of soil
in the load) Wait for suds to dissolve I_inse clothes using a deep rinse
32

Advertisement

loading