Advertisement
Available languages
Available languages
OI,>er ti n! l Problern
Is the power switched on?
Unplug ma(hine from the wall. Wait 60 se(onds, plug ba(k in and op_rat
the machine
Could you/household
power supply be at fault? Try plugging
in another ele< trK al appliawe
Are both hot and (old faucets turned on?
Are the inlet hose fikers blocked]?
Is Delay Start on?
Is the lid up?
Check that the machine is not siphoning.
Cl_e<k the black hose guide is installed.
Is the load out of balance? (reler pages 25 and 38),
E _ e
Che(k the macnln'
is level and does not lock,
It may have suds buildup
(refer spin light flashing, page 33),
The clothes _._/
..... e unevenly distributed
in the wash tub, you/Ecos?/_rt
TM
has compensated
by lowering
the spin speed
Check the feet are unscrewed and the rubber inserts are fitted so the machine is level and does not
rock.
Ioo rnuch water for load (page 30).
It may still be in the process of sensing the ware/level
(Reler to page 30)
Some loads do not suit Auto water level eg pillows, bedding, large bulky items. /\4anually select the
water level.
I_e[pr to pages 3c, to 38 to adjust the Auto f_ll level.
Banging -The load is out of balance (refer page 23).
Other noises - refer page :_].
_4
The water level is too high for the amount of clothes. This has caused excessive splashing. Use a
lower water level.
If this is happening when the water level is being automatically
selected, adjust the auto water level
down f_om Heavy Duty to Delicate setting (_ef_,rto page 38).
large bulky garments (eg pillows, comfo/ters) can cause splashing.
(Wash on Delicate cycle)
(Before calling for help please locate the serial number
of your washer
on its back top left
corner),
Advertisement
