Advertisement
Available languages
Available languages
f
et Opt
Chan!:l nf!
.......
..........
Option
Adjustment
Mode
After usin(l your Ecosmt;rtT''you may want to fine tune some of the options to suit your
wash needs
You can change the following pre set options:
the default rinse option
the amount of water used in the Shower Rinse
the number of beeps at the end of the cycle
the Out of Balance recovery routine
o the fill level selected by auto water level
the controlled cold option
Io make these changes it is necessary to enter the "Option Adjustment Mode"
To Enter Option
Adjustment
Mode
Pluo the machine in, but do not press POWER
PressSTART/PAUSE and hold down, then press
POWER
2 You will hear three quick beeps and the machine
will show an unusual pattern of lights, in this mode
the Eightsare used to indicate the different options
available. The diagram on page 27 shows how the
lights relate to the options you can change,
Pages 28
29 explain the different options in more
detail
s Use the buttons ors the panel to make your changes
to the pre set options
4 PressPOWERto return to normal mode
5 Your EcosmcrtT'' w ill automatically remember your
6 [o make further changes, repeat the above steps
0 _hr
0 3hr
0 lhr
Md Lo_k_d
Start
Favorite
Perma_eI_
Pfss$
2d
Advertisement
