Table of Contents
Advertisement
KEYLESS
CHUCK
See Figure 6,
The drill has a keyless chuck to tighten or release ddl]
bits in the chuck jaws. The arrows on the chuck indicate
which direction to rotate the chuck body In order to LOCK
(tighten} or UNLOCK (reTease)the driTIbiL
_
WARN|NG:
Do not hold chuck body with one hand
and use power of the dri)) to tighten chuck jaws on
ddl] bit Chuck body could slip in your hand or your
hand could slip and come in contact with rotating
drill bit This could cause an accident resulting in
serious personal tnJuryo
UNLOCK
DRILL BIT
(RELEASE)
CHUCK
JAWS
LOCK
(_GHTEN)
Fig_6
ADJUSTABLE TORQUE CLUTCH
This product is equipped with an adjustable torque
clutch for driving different types of screws into different
materials. Tl_epropersetting depends on the type of ma-
terial and the size of screw you are using,
TO ADJUST TORQUE
See Figure 7.
m Thereare twenb/-four torqueIndfcator settings located
on the front ofthe dr/it.
m Rotate the adjusting ring to the desired settlng
•
1-4
"
5"8
•
9-I2
°
I3-16
t7-23
For driving small screws
For driving screws into soft materiaI
For driving screws into soft and hard
materials
For driving screws into hard wood
For driving large screws
For heavy dr_/ling
TO DECREASE
TORQUE
AI)JUSTING FtlHG
%J
TO INCREASE
TORQUE
Fig° 7
LED WORKLIGHT
See Figure 8.
The LED worklight on the foot of the ddli will come on
when the switch trigger is depressed. This provides
additional lighting on the surface of the workpiece for
operation in lower-light areas,
LED
WORKLIGHT
13
Advertisement
Table of Contents
