6
Replacement
of drive belt
1.
Dismantle the cutting unit as described previously.
2.
Pull apad the contact for the cable to the electrical connec
tion (1).
3.
Dismantle the motion restrainer for the clutch (2).
4.
Engage the parking brake and work off the belt upwards
from the pulley (3), the clutch pulley (4).
5.
Push the belt up between two fan blades and rotate the
fan clockwise until the belt comes loose (5).
6. Take off the be_tfrom the engine pulley.
_
Assemblein thereverseordertodismantling. C heckthatthe
belt liesinsideallthebeltguides.Useodgina]beltsonlywhen
repiacingt
79