Advertisement
_(1)
Bottom edge of mower
(2) Lift link adjustment nut
6
_
SIDE-TO-SIDE ADJUSTMENT
•
Raise mower to highestposition.
•
At the midpoint of bothsidesof mower,measure height
from bottom edge of mower to ground. Distance A
shouldbe the same or within6ram (1/4") of each other.
•
If adjustment is necessary,make adjustment on oneside
of mower only.
•
To raiseoneside ofmower,tighten liftlinkadjustment n ut
on that side.
•
To Iowerone side of mower, loosen liftlinkadjustment nut
on that side.
NOTE: Three funtums of adjustment nut will change mower
height about 1/8".
•
Recheck measurements after adjusting.
7!
Advertisement
