Advertisement
5
' :(_-_
Toconvert
mower
Convertingto mulchingor rear discharging willrequirethe
purchase of these accessories.)
To mulching
•
Place deck into the high cut position.
•
Remove bagger or optionalrear dischargedeflector.
Unhookthe two(2) strapsand removedischarge chute
Insert plug and hartdteassemblythroughback plate
and ontothe mower deck chute adaptor,
•
Retaintheplugassemblybyconnecting thetwo straps
over the handle and hook intothe holes provided.
•
Replacebagger or optionalrear dischargedeflector to
allow mower to operate.
You are now ready to begin mulching.
To rear discharging
•
Place deck Into the high out position.
•
Remove bagger and mulchingplug (if installed).
•
Installdischargechute throughopeningin backplate
and slide over deck adaptor•
•
Attach the chute by hookingthe two straps into the
holesin the flange of the chute.
•
Install the discharge deflector to the backplate by
screwing the four (4) wing screws intothe threaded
insertslocatedin the backplate.
•
Tightenthe wing screwssecurely.
To bagging
•
Place deck intothe highcut position.
•
Removethe reardischargedeflectoror mulching plug,
Insert the discharge chute into the opening in the
backplate and ontothe mowerdeck adaptor.
Attachthechutetothetractorby hooldng thetwostraps
to the flange of the chute.
•
Install bagger intotractor.
57
Advertisement
