Advertisement
SERVICE
[] Have your power tool serviced by a qualified repair person using only identical
replacement
parts. This will ensure that the safety of the power toot is maintained,
[] When servicing a power tool, use only identical replacement
parts. Follow instructions
in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow
Maintenance
instructions may create a risk of shock or injury_
[] Hold power tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord, Contact with a "live" wire will
also make exposed metal parts of the tool "live" and shock the operator
m Use clamps or another practical way to secure and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control,
I_ Know your power tool. Read operator's manual carefully. Learn its applications
and
limitations, as well as the specific potential hazards related to this tool. Following this
rule will reduce the risk of electric shock, fire or serious injury_
[] Always wear safety glasses with side shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury.
[] Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule
wilt reduce the risk of serious personal injury
[] Protect your hearing. Wear hearing protection during extended periods of operation.
Following this rule will reduce the risk of serious person injury.,
[] Battery tools do not have to be plugged into an electrical outlet; therefore, they are
always in operating condition. Be aware of possible hazards when not using your
battery tool or when changing accessories.
Following this rule will reduce the risk of electric
shock, fire or serious personal injury.
[] Do not place battery tools or their batteries near fire or heat, This will reduce the risk of
explosion and possibly injury.
[] Do not crush, drop or damage battery
pack. Do not use a battery pack or Charger/
Adapter
that has been dropped or received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged battery immediately_
[] Batteries vent hydrogen gas and can explode in the presence of a source of ignition
such as a pilot light. To reduce the risk of serious personal injury, never use any cordless
product in the presence of open flame. An exploded battery can propel debris and chemicals, if
exposed, flush with water immediately,
[] Do not charge battery
tool in a damp or wet location, Following this rule will reduce the
risk of electric shock.
[] For best results, your battery tool should
be charged in a location
where the temperature
is more that 32°F (0°C) but less that 104°F (40°C). Do not store outside or in vehicles.
[] Under extreme usage or temperature
conditions, battery leakage may occur. If liquid
comes in contact with your skin, wash immediately
wit soap and water, then neutralize
with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at
least 10 minutes, then seek immediate medical attention. Following this rule will reduce the
risk of serious personal injury_
[] Save these instructions,
Refer to them frequently and use them to instruct others who may
use this toot., if you loan someone this toot, also loan them these instructions.
[] If the power supply cord is damaged, it must be replaced only by the manufacturer or by an
authorized service center to avoid risk.
Advertisement
