Download Print this page

Craftsman 320.10320 Operator's Manual page 14

16.0-volt lithium-ion cordless 3/8-in. drill/driver

Advertisement

LED FUNCTIONS
OF ChargerlAdapter
(Fig. 4)
Fig. 4
LED INDICATOR
_)
I/LO
TEMP,,
[_
(SEE
MANUAL)
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
PACK
HotlCold
battery
Defective
Charging
Flashing
RED
GREEN
ACTION
LED
LED
Charging will begin when
On
Off
battery returns to
32OF (0°C)_104°F (40°C)
,,,....
-
,
,, ,,,,,, ,,
Off
Battery pack or Charger/
Adapter
is defective
Off
Flashing
Charging
BATTERY
[_
FULL
Fully
charged
Off
On
Charging is complete
Maintenance
charging
CHARGING A HOT BATTERY PACK
If the battery pack is above normal temperature range, the red LED will be lit and the green
LED will be off° When the battery pack cools down to approximately
104°F (40°C), the Charger/
Adapter will automatically
begin charging.
CHARGING A COLD BATTERY PACK
If the battery pack is below the normal temperature range, the red LED will be lit and the green
LED will be off° When the battery warms to a temperature of more than 32°F (0°C), the Charger/
Adapter
will automatically
begin charging.
DEFECTIVE BATTERY
If the Charger/Adapter
detects a problem, the red LED will begin flashing and the green LED wil!
be off°
Im If defective, remove and reinsert the battery pack in the Charger/Adapter.
if the LED status
reads "defective" a second time, try charging a different battery pack.
[] If a different battery pack charges normally, dispose of the defective battery pack (see
Maintenance section).
[] If a different battery pack also indicates "defective," the Charger/Adapter
may be defective°
BATTERY CHARGING
If the battery pack is within normal temperature range, the green LED will begin flashing and the
red LED will be off., The battery pack wilt reach a full charge in about 60-120 minutes(depends
on battery's capacity). The POWER BAR LED lights will cycle right to left during charging. This
is part of the normal charging operation. The POWER BAR LED lights will not be displayed when
the POWER BAR button is pressed while the battery pack is on the Charger/Adapter.
BATTERY FULL
If the battery pack is within normal temperature range, the green LED will be lit and the red LED will
be off. The battery pack is fully charged and ready to use. The battery pack will fully charge, but will
not overcharge, if left on the Charger/Adapter.
The POWER BAR LED lights will not be displayed
when the POWER BAR button is pressed while the battery pack is on the Charger/Adapter.
NOTE: Charger/Adapter
may warm up with several continuous
charge cycles, This is
I
I
part of the normal operation
of the Charger/Adapter.
Charge in a well ventilated
area°
1
14

Advertisement

loading