Advertisement
_CAUTBON;
When placing the battery pack in the tool, be sure the raised rib on the
battery pack aligns with the bottom of the drill and latches into place properly. Improper
installation of the battery pack can cause damage to internal components.
_WARNIING:
Do not attempt to modify this drill or create accessories
not
recommended
for use with this drill. Any such alteration or modification
is misuse
and could result in a hazardous condition leading to possible serious injury,
TO ATTACH BATTERY PACK (Fig 6)
[] Lock the trigger switch on the drill by placing
the direction of rotation (forward/reverse/
center lock) selector in center position
Align the raised portion on the battery pack
with the grooves on the bottom of the drill,
then attach the battery pack to the drill as
shown
i_t Make sure the latch on the battery pack
snaps into place and the battery pack
is secured to the drill before beginning
operation,
Fig. 6
TO DETACH BATTERY PACK (Fig. 6)
[] Lock the trigger switch on the drilt by placing the direction of rotation (forward/reverse/center
lock) selector in center position
[] Press the latch located on the front of the battery pack to release battery pack°
I_ Pull forward on the battery pack to remove from the drill
A_kWARHJNG:
Battery tools are always in operating condition. Therefore, direction of
rotation selector should always be locked when not in use or carrying at your side.
15
Advertisement
