Table of Contents
Advertisement
urface Cookin
LOCATIONS OF THE BURNERS
m
[]
[]
I
[]
[]
[]
I
[]
[]
[]
[]
[]
[]
[]
I
[]
The 30" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
a 5 000 BTU (natural gas) burner located at the right rear position;
a 18 000 BTU (natural gas) burner located at the center rear position;
two 9 500 BTU (natural gas) burners located at the left positions;
and a 12 000 BTU (natural gas) burner located at the right front position.
[]
1
[]
[]
[]
30" cooktop
PLACEMENT OF BURNER HEADS AND CAPS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
For the 18 000 BTU burner :
Place the burner head over the gas orifice (Figure 1). Be careful not to damage the electrode
while placing the burner head over the orifice. Make sure electrode fits correctly into slot
in burner head.
Burner Cap
For all burners
:
Place a burner cap on each burner head (see
Figure 2), matching the cap size to the head
size. The cap for each burner has an inner
locating ring which centers the cap correctly
on the burner head. Be sure that all the burner
Burner
caps and burner heads are correctly placed
Head
BEFORE using your appliance.
Burner
Cap
Make sure each burner cap is properly aligned
and level.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.
Figure 1
Figure 2
Advertisement
Table of Contents
