Table of Contents
Advertisement
Surface Cooking
LOCATIONS O FTHEBURNERS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The 30" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
a 5 000 BTU (natural gas) burner located at the right rear position;
a 14 000 BTU (natural gas) burner located at the left rear position;
a 18 000 BTU (natural gas) burner located at the left front position;
and a 18 000 BTU (natural gas) burner located at the right front position.
[]
[]
[]
[]
The 36" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See
Figure):
a 5 000 BTU (natural gas) burner located at the center rear position;
a 9 500 BTU (natural gas) burner located at the right rear position;
a 14 000 BTU (natural gas) burner located at the left rear position.
a 14 000 BTU (natural gas) burner located at the center front
position.
a 18 000 BTU (natural gas) burner located at the left front;
and a 18 000 BTU (natural gas) burner located at the right front
position.
P CEMENT OFBURNER HEADS ANDCAPS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
For the 18 000 BTU burner :
Place the burner head over the gas opening (Figure 1).
Be careful not to damage the electrode
while placing
the burner head over the orifice.
Make sure electrode
fits correctly into the hole in the burner head.
For all burners
:
Place a burner cap on each burner head (see Figure 2),
matching the cap size to the head size. The cap for each
burner has an inner locating ring which centers the cap
correctly on the burner head. Be sure that all the burner
caps and burner heads are correctly placed BEFORE
using your appliance.
Burner
Head
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light, if the burner
does not light, contact a Service Center. Do not service
the sealed burner yourself.
Figure1
[]
[]
Gas
Opening
30"cooktop
Figure2
Advertisement
Table of Contents
