Surface Cooking; Locations Of The Burners; Placement Of Burner Caps - Electrolux Gas Cooktop Use And Care Manual

Surface Cooking
Location of the Burners
The cooktop is equipped with different sized _ _:_:_:
burners.
The surface burners are located on the cooktop as
follows (See Figure):
a 5 000 BTU (natural gas) burner located at the
right rear position;
a 20 000 BTU (natural gas) burner located at
the center rear position;
a 9 500 BTU (natural gas) burners located at the
left front position;
a 7 500 BTU (natural gas) burners located at the
left rear position;
and a 12 000 BTU (natural gas) burner located
at the right front position.
Placement of burner caps
Place a burner cap on each burner head,
matching the cap size to the head size. The
cap for each burner has an inner locating
ring which centers the cap correctly on the
burner head. Be sure that all the burner
caps and burner heads are correctly placed
BEFORE using your appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact a
Service Center. Do not service the sealed
burner yourself.
ATTENTION: Do not slide the burner caps
on the cooktop, doing so can damage the
surface.
Burner
Cap
Burner
Head
\\
\ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
BurnerCapiiiiiiiiiiiiiiiiiiiiiiiiii
Burner iiiiiiiiiiiiiiiiiiiii
Head iiiiiiiiiiiiiiiiiiiii
BurnerSimmer iiiiiiiiiiiiiiiiiiiiiiiiiiiii
Precision Flame iiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiii