Table of Contents
Advertisement
General Care
Cleaning
CLEANING THE BURNER GRATES, BURNER CAPS,
BURNER HEADS, SIMMER PLATEAND GRIDDLE
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The Burner Grates, Burner Caps, Burner Heads, simmer plate
and griddle should be routinely cleaned. Keeping the burner
ports clean will prevent improper ignition and an uneven
flame.
Refer to the following instructions:
To Remove and Replace the Surface
Burner Grate,
Surface Burner Cap and Surface Burner Head - Remove
in the following order; (1 st) Surface Burner Grate, (2nd)
Surface Burner Cap, (3rd) Surface Burner Head (if not
screwed) (See Figure 1).
Reverse the procedure above to replace the Surface Burner Cap,
Surface Burner Head and Surface Burner Grate. Do not remove any
burner parts from the cooktop
until the burner parts have
completely
cooled
and are safe to handle. Do not operate the
surface
burners
without
the Surface Burner Caps, Surface Burner
Heads and Surface Burner Grates properly in place.
[]
[]
Surface
Burner
Cap
Surface
Burner
Head
Advertisement
Table of Contents
