Table of Contents
Advertisement
Surface Cooking
USINGTHEWOKSTAND
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to be
used. it is recommended
that you use a 14 inch diameter (35.5 cm) or less Wok. It is
recommended that you use the right front POWER burner with the wok stand for best
performance. If properly positioned, the Wok Stand will not slide off the grate.
To Properly
Position
the Wok
Stand:
With the grate in I:x:)sition over the bumer, set the Wok Stand on top of the
grate positioning the notches in the Wok Stand over the cooktop grate
fingers (See Figure 1).
Figure 1
Fiat-bottom
woks with large flat
bottoms may also be used on your
cooktop Surface Burner Grates
without the Wok Stand (See Figure
2). Insure the stability of the flat-
bottom wok before cooking without
the Wok Stand. If unstable, DO
NOT use the flat-bottom wok
without the Wok Stand.
Round-bottom
woks (with a
support ring) should NOT be
used (See Figure 3). The
supporting ring was not designed
for proper or stable use on the
Surface Burner Grates.
Proper use of flat-bottom wok
on Surface Burner Grate
Figure 2
ImproF
on Surface Burner Grate
Figure 3
Advertisement
Table of Contents
