Cleaningtheburnergrates,Burnercaps, And Burnerheads - Electrolux E36GC70FSS1 Use & Care Manual

General Care & Clean"
CLEANING THEBURNER GRATES, B URNER CAPSAND
BURNER HEADS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The Burner Grates, Burner Caps and Burner Heads should be routinely cleaned. Keeping
the burner ports clean wil prevent improper ignition and an
uneven flame.
Refer to the following instructions:
To Remove and Replace the Surface Burner Grate,
Surface Burner Cap and Surface Burner Head = Remove
in the folowing order; (1 st) Surface Burner G rate, (2nd) Surface
Burner Cap, (3rd) Surface Burner Head (See Figure 1 ).
Reverse the procedure above to replace the Surface Burner
Cap, Surface Burner Head and Surface Burner Grate. Do not
remove any burner parts from the cooktop until the
burner parts have completely cooled and are safe to
handle. Do not operate the surface burners without the
Surface Burner Caps, Surface Burner Heads and Surface
Burner Grates properly in place.
Surface Burner Grate
Burner
Cap
To Clean the Burner Caps, Burner Heads and Burner
\
Surface
Burner
Head