Advertisement
4. Replace
column
collar
and position
it bevel side
down
over
rack. Tighten
set screw in collar with
3ram
HEX "E' wrench.
To let the rack slide when
the table
is swung
to the left or right around
the
column,
the collar
must s_t loosely
over rack aria
should
not be angled on the column-
Only tighten
set screw enough to keep collar _n ulace, otherwise
the collar may De broken due to excess pressure
CAUTION:
To avoid co lumn tube or collar dam-
age, do not over tighten
set screw.
COLUMN
COLLAR
RACK
5. Locate support
lock handle in loose 3arts bag.
6. Install support lock from left side into table support
and tighten by hand.
TABLE
SUPPORT_
SUPPORT
LOCK
HANDLE
7. Locate table crank in loose parts bag.
8. Install table crank assemb y and tighten set screw
with a 3turn HEX "E' wrench.
TABLE
SUPPORT
TABLE
CRANK
12
Advertisement
