Page 1
ETA-ECM20 & ETA-ECM20M Electrical Control Module 20A Power Conditioner ETA-ECM20 & ETA-ECM20M Electrical Control Module 20A Power Conditioner 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 1 – ETAsys.com Specifications are subject to change without notice.
Page 2
Suppressor that are designed to be used as a standalone unit or in conjunction with an ETA-ECS6RM Controller up to 1000 ft away. The ETA-ECM20 and ETA-ECM20M are designed to be used with the ETA-RACEWY6 which can house up to 6 modules. Single housing models (ETA-20SH and ETA-15SH) are also available.
Page 3
A AC Current Status Signal, this signal reports back to the ETA-ECS6RM the AC Mains Current draw at the ECM module. Note: Not available on ETA-ECM20 type module. D Fault Status Signal, reports to the ETA-ECS6RM fault conditions of an ECM module.
Need help?
Do you have a question about the ETA-ECM20 and is the answer not in the manual?
Questions and answers