Page 1
Power Conditioner & Distribution Unit ETA-S15 Power Conditioner & Distribution Unit 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800-321-6699 • Fax: 800-996-3821 – 1 – ETAsys.com Specifications are subject to change without notice. ETA003561 ETA-S15 Owner's Manual.indd 1 12/18/09 9:58:29 AM...
18. The mains plug of the power supply cord shall remain readily operable. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800-321-6699 • Fax: 800-996-3821 – 3 – ETAsys.com Specifications are subject to change without notice. ETA003561 ETA-S15 Owner's Manual.indd 3 12/18/09 9:58:31 AM...
Page 4
• W hen cleaning the unit or the unit is not to be operated for an extended time period, unplug the power cord from the wall. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800-321-6699 • Fax: 800-996-3821 – 4 – ETAsys.com Specifications are subject to change without notice. ETA003561 ETA-S15 Owner's Manual.indd 4 12/18/09 9:58:31 AM...
3. Power Switch – To turn the ETA-S15 on or off, press the switch to the ON or OFF position. The power switch will illuminate when in the “On” position. REAR PANEL FEATURES 1. AC Mains Input – Connect the 9' (3m) power cord to a 15A 120VAC outlet to provide power to the ETA-S15. 2. AC Switched Power Outlets – These six outlets are “Live” when the front panel power switch is activated. 3. AC Unswitched Power Outlets – These two outlets are always “Live” when the ETA-S15 is plugged into a 120VAC source. INSTALLATION Before installing, we strongly suggest you read the entire manual to ensure you benefit from all the features of the ETA-S15. The ETA-S15 can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounted, placement within the rack is flex- ible however the ETA-S15 should be within 6' of a dedicated 15A AC outlet. When rack mounting, use Rack Rail screw type ⁄...
Need help?
Do you have a question about the ETA-S15 and is the answer not in the manual?
Questions and answers