To Store The Table Saw Accessories; To Move The Leg Stand; To Remove/Replace The Throat Plate - Craftsman 315.218060 Operator's Manual

TO STORE THE TABLE SAW ACCESSORIES
SeeFigures
3- g.
The table saw has two convenient storage areas (one on
either side ot the saw cabinet) specifically desigt_ed [er
the saw's accessories.
When net in see, store the accessories securely by snap-
ping each accessory in place
ST{IBhGEHOOK Fig. 8
STORAGE
HOOK
Fig£
TO MOVE THE LEG STAND
See Figure 10.
To move the leg stand:
I
Holdin 9 _#i e
_e_
S[_d _r_, pU_
the _egstand t_waldl
you until the leg stand and saw are balanced en the
wheels.
B Pus!_ the saw to the desired location then either open
the !eg sland for immediate saw operation or store th_
saw in a dry environment.
TO REMOVE/REPLACE THE THROAT PLATE
See Figure, 1I.
8 Lower the blade by turning the height/bevel adiuslin £
handwheel counterclockwise.
B LooSen the screws in the throat plate•
Lift the threat plate from the saw.
• 1 TO [einst&U the throat plate, alige the holes in the throa
plate with the holes in the saw table.
o I
El Relightcn the screws, being careful not to evertighten,
which can cause the throat plate te bow or bend.
SAWTABLE
•:i:; ¸ .... :_•i .
Fig. 1 i
17