Optional Table Saw Accessories; Unpacking And Checking Contents - Craftsman 171.240300 Owner's Manual

9-32040 CraftsmanStorageBasketSet
Keeps accessories, fence(when notbeingused),
tablesawinsart p lates, p roject p ieceshandy and
ready foruse.Two8 3/4"x 36"
baskets; one open
end, one closed and. Mount to Craftsman table
saws, radial saws and band saws.
9-3214, 9-3217, 9-3218 Craftsman Molding Heads
and Molding Sets
Turn your table saw into a shaper with one of the
unique Craftsman molding head sets. Make decora-
tive edges, woodworking joints, and fan_y trim with a
Craftsman molding head cutter bits.
9-3233 Craftsman Taper Jig
Tapers to 3 in/ft or 15% Handy reference scale in
degrees of taper. Has locking bracket and positive
push heal. May be reassembled for use on either
side of table saw fence.
9-32190 Craftsman Table Saw Guide Master
Multipurpose push shoe helps in table saw blade
setup for angle settings. Used for ripping operations;
has high handle that helps keep hands away from
saw blade. Long front of table saw Guide Master
keeps pressure down on top of board, eliminating
chatter. Includes gauges for 22 1/2° , 45 °, and 90 °
angles and two measuring scales for easy reference.
Accurate blade height indicator steps in 1/16" incre-
ments. Finds the center for both round and square
pieces.
9-32371 Craftsman Table Sew Fence Guide
System
Designed for use with most table saws. The Fence
Guide System is designed for ripping operations slid-
ing over the rip fence and guiding the stock through
the blade. The unit will adjust to a maximum fence
width of 2 1/2" in width and 3 1/8" in height. Built-in
setup checks blade for squareness, 45 ° angle set-
ting and depth of cut scale for blade and dado
height/depth. Adjustable clamping features aid in cut-
ting tenons and sawing spine cut for miter joints.
Craftsman Saw Blades and Dado Heads
There is a blade and dado almost any need.
Craftsman Steel, Carbide, Industrial, and Excalibur
blades and dadoes are manufactured for the week-
end user or the professional woodworker/contractor.
Refer to Parts List on page 17
[__WARNINGJ If ANY of the parts are missing,
or cannot be accounted for, DO NOT attempt to
assemble, install, or use the Table Saw Box Joint
and Miter Guide until the missing parts have been
obtained and the product has been assembled
properly.
- Contact your local Sears Retail Outletl or Service
Center, for a replacement product, or for the missing
pads.
• In order to simplify handling, and to minimize
any damage that may occur during shipping, your
Table Saw Box Joint and Miter Guide are packaged
unassembled.
• Separate all parts from the packaging materials
and check each part against the illustrations and the
Parts List at the end of this manual, to make sure
that all parts are accounted for. Do this before
discarding any of the packaging material.