Table of Contents
Advertisement
OPERATING
COMPONENTS
The upper podioo of the blade pro}ects up through the
tabie and is staTounded by an insert called the throat
plate. The height of the blade is set with a handwheel on
the front of the cabinet. To accommodate wide panels,
the saw table has rails on each aide, Detailed instructions
are provided in the Operation section of this manual for
the basis cuts: cross cuts, miter cuts, bevel cuts, and
compound cuts.
The sliding miter table assembly is used for sloes cutting
operations. The miter fence is easily adjusted to cut wood
at an angle by loosening the adiustJn § clamp, setting the
fence to the miter scale, and retightening the clamp. The
sliding miter table, which rests on a base mounted on the
rails, can be repositioned along the rails for wide work. it
can be reversed so the projecting base is in the back and
can be moved from the left side to the right side as need-
ed, With the miter fence removed, the miter table offers
additional support for other operations such as ripping.
The rip fence is used to position work for lengthwise cuts.
A scale on the front rail shows the distance between the
rip fence and the blade.
It is very important to use the blade guard assembly for all
Ihrough-sawi#g operations. The blade guard assembly
includes: riving kniteispreader/splitter,
anti-kickback
pawls, and plastic blade guard.
POWER SWITCH
This saw is equipped with a power switch thai has a
built-in locking feature. This feature is intended to prevent
unauthorized and possible hazardous use by children and
others.
TO TURN YOUR SAW ON:
8 With the switch key inserted into the switch, lift the
switch button to turn ON [ I ).
TO TURN YOUR SAW OFF:
I_ Press the switch button down to turn OFF ( O ).
TO LOOK YOUR SAW:
m Press the switch button down.
I_1 Remove the switch key from the switch and store in a
safe, secure location.
_
WARNING:
Atways remove the switch key when
_he tool is not in use and keep it in a safe place. Ir
the event of a power faiture, turn the switch OFF
O ] and remove the key. This action will prevent I
tool from accidentally starling when power return_
WARNING:
ALWAYS
make
sure your
workpiece
not in contact
with the blade
before
operating
the
switch
to stad the tool.
Failure to heed
this warnin
may cause
tile workpiece
to be kicked
back
towa_
the operator
and result
in serious
personal
injury.
WARNING:
To reduce the risk of accidental star1
Always make sure the switch is in the OF F ( O ) pest
before plugging tool into the power source.
SWITCI'I
SWITCH
ON
OFF
i
-•-
•
•
i
•
Hide quick links:
Advertisement
Table of Contents
