Oki GL408e Manual
Simple dispenser
Hide thumbs
Also See for GL408e:
- Install manual (15 pages) ,
- Manual (8 pages) ,
- Install manual (11 pages)
Subscribe to Our Youtube Channel
Related Manuals for Oki GL408e
Summary of Contents for Oki GL408e
- Page 1 SIMPLE-DISPENSER INSTALLATION GUIDE For printer models: 4xxe Series Read this Installation Guide before and during the installation of the above accessory. Keep this Installation Guide handy for future reference.
-
Page 2: Important Information
Simple-Dispenser Installation Guide General 1.1 Important information This quick guide provides important information on how to setup your new SATO product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the immediate vicinity of the device and available to the operating staff. -
Page 3: Explanation Of Symbols
Simple-Dispenser Installation Guide 1.3 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product, serious injury to the operator, or worse. - Page 4 Simple-Dispenser Installation Guide Contact and Document Information Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com Version: SI-GL4xxe-01rA-05-06-07-SSDIG © Copyright 1994 – 2007 All rights reserved. No part of this document may be reproduced or issued to third parties in any form whatsoever without the express permission of SATO.
- Page 5 Simple-Dispenser Installation Guide GL4xxe Simple-Dispenser Installation The Simple Dispenser comes with its own front cover to replace the factory-installed front cover of the GL4xxe series printer. Follow the procedures below to install the Simple Dispenser. 1. Make sure the printer is OFF and disconnected from the power supply. 2.
- Page 6 Simple-Dispenser Installation Guide GL4xxe Simple-Dispenser Installation 4. Affix the dispenser (3) to the printer by plugging the white connector (4) into the complementary connector (4) on the printer. 5. Mount the simple dispenser by hooking it as shown in the illustration at the bottom of the page.
- Page 7 Simple-Dispenser Installation Guide GL4XXE SIMPLE-DISPENSER CONFIGURATION Dispenser setup via the LCD Menu OFFLINE 1. Turn the printer ON and wait for it to initialize and go into ONLINE mode. 2. Press the Line Button to go to OFFLINE mode. 3. Press the Function Button to display the different menu icons ADVANCED MODE 4.
- Page 8 Simple-Dispenser Installation Guide...
Need help?
Do you have a question about the GL408e and is the answer not in the manual?
Questions and answers