Oki C9600hdn Installation Manual page 3

5. Slip the other end of the band through the
retainer on the finisher, then secure it with the
smaller stopper.
6. Turn the cover so it faces the finisher.
7. Place the larger stopper over the tab and turn
to lock it in position
8. Attach the rear cover to the finisher and close
it.
9. Loosen the screw on the locking piece so that
it drops through the slot below. This keeps the
platform from moving while you attach the
finisher to it.
10.Position the finisher on the stand and attach
it with two screws from the back.
11.Swivel the locking piece up and tighten the
screw firmly. Be sure it's out of the way and
the screw is tight—otherwise the platform will
not move freely.
3