12.Position the stacker on the back of the
finisher with the hooks engaged.
13.Make sure the lever on the finisher is
positioned above the stacker.
14.Attach the stacker with four screws.
© 2005 Oki Data Americas, Inc.
Complete the Assembly
Leveller
1. Push the finisher against the printer until the
prongs on the printer brackets fit into the
holes in the finisher.
2. If you need to, turn the levellers on the
finisher to raise or lower the finisher so the
holes and prongs align properly. Make sure the
finisher is level.
3. Connect the printer and the finisher to the
inverter, and connect the inverter's power
cord.
58372801