A checkmark appears in the box.
6. Click the
Setup
7. Under
Driver
is selected.
8. Click the
Job Options
9. Click Overlay.
10. Click
Define
11. At Name, enter the name for your overlay.
12. Enter the other information, as necessary.
Try to keep the overlay to a single sheet.
Don't use N-up, duplex, finisher options, etc. when creating an
overlay. These can be added when printing the document that
includes the overlay.
13. Click Add.
14. Click Close.
15. Click OK.
16. Click OK.
17. Click OK.
18. The document prints. However, a hardcopy document doesn't
print. The document is stored on the printer's hard disk.
tab.
Settings, make sure the appropriate driver setting
tab.
Overlays.
C9600 Utilities Guide
Storage Device Manager • 193