Overlays
Windows PostScript
Printing
1. Open the file you want to print.
→ Print.
2. Click
File
3. Right-click the appropriate printer.
4. Your action depends on your operating system.
Windows XP:
Windows 2000:
Win Me/98, NT:
5. Click the
Job Options
6. Click
Overlay...
7. To define an overlay, click
8. In the
Overlay Name
The Overlay Name must be EXACTLY the same as the file
name you noted in the previous section. This is the name
under which the file is stored on the printer's hard disk
drive. It is case sensitive.
9. In
ID Values,
instructions for the Storage Device Manager utility.
10. Select the pages where the overlay prints. Use
Print on Pages
or
Custom Pages
11. Click Add.
12. Click Close.
13. Repeat steps 8 though 12 for each overlay you wish to add.
Click Preferences.
Click
Printing
Click Properties.
tab.
Define
list, enter the file name of the overlay.
NOTE
enter the ID of the file. Please refer to the
to select specific page numbers in the document.
C9600 Utilities Guide
Storage Device Manager • 188
Preferences.
Overlays.