Xml: Aastraipphoneexecute Object - Aastra 480I Release Notes

Release 1.4.1
Hide thumbs Also See for AASTRA 480I:
Table of Contents

Advertisement

XML: AastraIPPhoneExecute Object

A new XML AastraIPPhoneExecute object has been implemented on the IP
phones. This object provides the ability to execute commands on the phone using
XML. Release 1.4.1 supports the following Execute object commands:
Reset - This command waits until the phone is idle and then executes a reset.
NoOp - This command has no affect on the IP phone. It is made up of a blank
URI. You can use this feature when you need to press a key on the phone to
access a feature, and it is not necessary to display anything.
Since the server forces phone firmware changes, the AastraIPPhoneExecute
object was implemented to send the reset command to the phone.
AastraIPPhoneExecute Object Structure
The AastraIPPhoneExecute object describes the structure of the XML document
that is used to send a command to the phone. It delivers multiple execution
requests to the phone. The basic structure of the AastraIPPhoneExecute object is:
<AastraIPPhoneExecute>
<ExecuteItem URI ="the URL or URI to be executed"/>
<! -- Additional execution items may be added under new ExecuteItem tag-->
</AastraIPPhoneExecute>
41-001024-00, Rev 09, Release 1.4.1
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

480i ct9112i9133i

Table of Contents