Install The Ferrite Core - Oki C7300 Software Installation Manual

Network Installation

Install the Ferrite Core

Important!
In order to reduce electromagnetic interference—"noise" that interferes with TVs or other appliances—you
must put the enclosed ferrite core on the network cable connected to your printer.
This is required by the FCC.
Here's how to do it:
□ Disconnect the network cable from the printer, if necessary.
□ Loop the cable if necessary to keep the ferrite core
in place.
□ Place the open core about 1 inch from the cable connector on the printer end.
□ Press the two halves of the core together until they
click shut.
4