Oki C7300 Software Installation Manual page 6

Windows ®
Install Printer Software for TCP/IP (cont.)
Activating the Duplex Unit, Internal
Hard Drive and 0ptional Paper Trays
If your printer has a duplex unit or internal hard drive
(standard on Models C7100dxn, C7300dxn, C7500dxn,
C9300dxn and C9500dxn) or optional paper trays, you
must enter the driver and activate them.
To activate in the PostScript driver:
□ Click Start
Settings
□ Right click the OKI PostScript printer icon, then click
Properties.
Windows 2000, XP and NT 4.0:
□ Click the Device Settings tab.
□ Scroll down to Installable Options.
□ Click Duplex, then click Installed in the box
below; do the same thing for Hard Disk.
Windows Me, 98 and 95:
□ Click the Device Options tab.
□ Select Duplex Option Unit, Printer Hard Disk, and
select optional paper trays if installed.
□ Click OK, then close the Printers dialog box.
To activate in the PCL driver:
□ Click Start
Settings
□ Right click the OKI PCL printer icon, then click
Properties (Windows 2000/XP/Me/9x), or Document
Defaults (Windows NT 4.0).
□ Click the Device Options tab.
□ Select Duplex Option Unit, Printer Hard Disk, and
select optional paper trays if installed.
□ Click OK, then close the Printers dialog box.
Network Installation
Printer.
Printer.
6