Windows Me - Oki C7300 Software Installation Manual

USB
Install Printer Software for Windows Me
Install the PostScript Driver
□ Check that the USB cable is plugged in.
□ Turn the printer on.
□ Add New Hardware Wizard displays. Select "Specify
the location of the Driver." Click Next.
□ Insert CD1 into the CD-ROM drive.
□ Select "Specify a location.... select Removable
Media."
□ Click Browse. Navigate to your CD-ROM
drive\Drivers\Parallel\Win9xMe\PS. Click OK.
□ Click Next.
□ Follow the on-screen instructions to complete the
installation.
□ Click Finish.
□ Add New Hardware Wizard displays. Select "Specify
the location of the Driver." Click Next.
□ Select "Specify a location..." Click Next.
□ Select "Updated Software..." Click Next.
□ Click Next to begin the install.
□ Follow the on-screen instructions to complete the
installation.
□ Click Finish.
Install the PCL Driver
If you choose to also install the PCL driver, use the Add
Printer Wizard.
□ Insert The OKI CD-ROM into your CD-ROM drive.
Click Start Settings
□ Double Click Add Printer.
□ The Add Printer Wizard displays. Click Next.
□ Select Local Printer. Click Next.
Printers
□ Click Have Disk.
□ Click Browse. Browse to your CD-ROM
drive\Drivers\Parallel\Win9xMe\pcl. Click OK.
□ Click OK.
□ Select your printer model. Click Next.
□ Select the OP1USB1 printer port. Click Next.
□ Follow the on-screen instructions.
□ Click Finish.
Install Printer Software Utilities
□ With the CD installed in your CD-ROM drive, click
Start Run. Browse to your CD-ROM Drive and
double-click Install. Click OK.
□ The Licence Agreement appears. Click I Accept.
Click Next.
□ The Menu Installer displays. Click the Productivity
Software button.
□ Install the utilities you want following the on-screen
instructions.
To access the utility programs from your desktop, click
Start Programs OkiData.
Activating the Duplex Unit, Internal
Hard Drive and 0ptional Paper Trays
If your printer has a duplex unit or internal hard drive
(standard on Models C7100dxn, C7300dxn, C7500dxn,
C9300dxn and C9500dxn) or optional paper trays, you
must enter the driver and activate them.
See page 6 for instructions on how to do this.
12