Snmp Configuration; Raid Manager Command Devices - HP XP1024 System Configuration Manual

SNMP configuration
The XP family of disk arrays supports standard Simple Network Management Protocol
(SNMP) for remotely managing the disk array. The SNMP agent on the service processor
(SVP) performs error-reporting operations requested by the SNMP manager. SNMP
properties are usually set from the SVP but they can also be set remotely using Remote
Web Console XP, Command View XP, or Command View XP Advanced Edition. Refer to
the applicable user's guide for procedures.

RAID Manager command devices

RAID Manager manages Business Copy (BC) or Continuous Access (CA) operations
from a host server. To use RAID Manager with BC or CA, you use Remote Web Console,
Command View, or Command View XP Advanced Edition to designate at least one LDEV
as a command device. Refer to the applicable user's guide for information about how to
designate a command device.
Disk Array XP operating system configuration guide: IBM AIX
11