RC Suggested Action
Perform remote copy troubleshooting such as checking the physical links between the storage
system, and using CLI commands such as showrcopy, showrcopy -d, showport -rcip,
showport -rcfc, shownet -d, controlport rcip ping, etc.
SNMP
Displays issues with SNMP. Attempts the showsnmpmgr command and reports errors if the CLI
returns an error.
Format of Possible SNMP Exception Messages
SNMP -- <err>
SNMP Example
Component -Identifier- ----------Description---------------
SNMP
--
SNMP Suggested Action
Any error message that can be produced by showsnmpmgr may be displayed.
Task
Displays failed tasks. Checks for any tasks that have failed within the past 24 hours. This is the
default time frame for the showtask -failed command.
Format of Possible Task Exception Messages
Task Task:<Taskid> "Failed Task"
Task Example
Component --Identifier--- -------Description--------
Task
Task:6313
For this example, checkhealth also showed an Alert; this task failed because the command was
entered with a syntax error:
Alert
sw_task:6313
-f') has failed (Task Failed). Please see task status for details.
Task Suggested Action
The CLI command showtask -d Task_id will display detailed information about the task. To
clean up the Alerts and the Alert-reporting of checkhealth, you can delete the failed-task alerts
if they are of no further use. They will not be auto-resolved and they will remain until they are
46
Troubleshooting
Could not obtain snmp agent handle. Could be
misconfigured.
Failed Task
Task 6313 (type 'background_command', name 'upgradecage -a