Fabric and connection parameter settings
Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL
as shown in the following figure and table. For detailed topology information, refer to
the HP StorageWorks SAN Design Reference Guide on the
Fabric Parameter
ON
ON
OFF
OFF
Connection Parameter
FC-AL
Point-to-Point
FC-AL
Point-to-Point
Disk Array XP operating system configuration guide: IBM AIX
http://www.hp.com
Provides
FL-port (public arbitrated
loop)
F-port (fabric port)
NL-port (private arbitrated
loop)
Not supported
website.
17