Power Line Transients - HP StorageWorks XP1024 Manual

Power line transients

Preparing for installation
The Russelstoll connectors are available through most industrial electrical
distributors. HP has arranged for these connectors to also be available in
stock from the distributors listed below. These distributors are able to ship
worldwide and ship via customer preference.
Beck Electrical Supply
2775 Goodrick Avenue
Richmond, CA 94801 USA
Telephone: (800) 466-4395
Fax: (800) 466-5442
Contact: Ken Mogan
casales@beckelectric.com
Source Research, Inc. (SRI)
2160 Sunnydale Boulevard
Clearwater, FL 33765-2108 USA
Telephone: (800) 356-0259
Contact: Erik Peterson, telephone extension 302
http://www.sourceresearch.com/index.cfm
Heavy electrical loads from nearby machinery or equipment (elevators,
electric welders, etc.) can cause intermittent system problems with
sophisticated electronic equipment, even if that equipment is on a separate
circuit breaker. When faced with these conditions, you should provide a
separate, completely independent power panel with an isolated ground and
circuit breaker coming directly from the main building power source or
secondary power source.
If necessary, your HP CE can measure your power line noise level and
make appropriate recommendations concerning the use of line treatment
devices.
49