Physical Requirements - HP StorageWorks XP1024 Manual

Physical requirements

22
Dimensions
An HP Disk Array XP1024 consists of a single DKC cabinet and one to
four DKU cabinets with the approximate dimensions listed in the table
below.
Minimum
Dimensions DKC mm
Height 1860
Width 782*
Depth 800
* The width of the DKC includes the side panels.
Weight
An HP Disk Array XP1024 consists of a single DKC cabinet and one to
four DKU cabinets. The table below provides the approximate weights for
a minimum and maximum configuration. The main factor that increases
weight is the number of hard disk drives (HDDs) in a DKU cabinet:
Weight
Minimum
configuration
Maximum
configuration
Specific component dimensions and weights
The values listed in these tables are approximate and should be used for
general reference only; use these values to estimate the hallway and door
clearances as well as floor strength for moving the disk array cabinets.
HP StorageWorks Disk Array XP1024: Site Preparation Guide
DKC in DKU mm
73.6 1860
30.8 750
31.5 800
DKC kg DKC lb DKU kg DKU lb
478 1051 492
586 1290 755
DKU in
73.6
29.5
31.5
1082
1661