Installation Requirements
Hardware Component
Storage Arrays (one or more)
Fibre Channel host adapters
Fibre Channel fabric switches
Requirements
HP SureStore E Disk Array FC60 with controllers using
firmware version 4.00.00.x. Firmware version 4.00.02.x is
recommended.
The following Fibre Channel host adapters are supported:
QLogic™ 2100F
•
QLogic™ 2200F
•
Emulex™ LP8000
•
Emulex™ LP7000e
•
HP D8602A NetServer FC HBA
•
HP D8602B NetServer FC HBA
•
NOTE! If you are using version 2.0 of the Agilent driver,
it is recommended that you upgrade to version 3.0,
which provides support for 32 LUNs.
Refer to the readme file in the
the installation CD for the latest information on host
adapters and host adapter drivers.
The following Fibre Channel fabric switches are
supported:
Brocade® 2400 switch
•
\Host Adapter
folder on
31