Drive letters of shared volumes do not match in Disk Administrator on both nodes.
C
The wrong letters were assigned during installation.
AUSE
A
Use the
CTION
node to ensure that the drive letters are the same as those assigned to node A.
For example, if Node A had an internal hard disk at drive letter C: and Node B had two internal
hard disks at C: and D:, then the shared disk letters would not match (Node A would start at drive
D: and Node B would start at drive E:; therefore, you would have to change the drive letter at
Node A to start at drive E:).
96
in the Disk Administrator on the appropriate