Cluster Server Troubleshooting - HP Surestore Disk Array 12h - And FC60 Manual

Cluster Server Troubleshooting

Both node names do not appear in the Cluster Administrator window.
C The storage management software was not installed correctly.
AUSE
A
CTION
1
Select
management software on both nodes.
2
Verify that there is not an IP conflict on the network and that all cabling is installed correctly
and securely.
3
Begin the installation procedure again, starting with
Groups do not revert back to the preferred node after the Cluster Service is resumed.
C Most likely, the Groups are not set to a preferred node.
AUSE
A Do one of the following:
CTION
• Set the preferred node option:
Select the node.
Select
Set the Preferred Node option for the desired node.
• Manually move the Groups back to the node:
Select the node.
Select
Select the Group you want the node to own, and select
every group that you want the node to own.
Select the node again.
Select
"Assigning Drive Letters" on page
.
.
.
to uninstall the storage
69.
. Repeat for
95