Modifyremoteassociation - HP StoreVirtual 4000 User Manual

fcenabled
Example
cliq modifyNSM login=10.0.1.2 userName=admin passWord=secret
fcenabled=1

modifyRemoteAssociation

This command modifies a previously created remote volume association.
Availability: Windows, SAN/iQ
Version: 8.0
Warnings
This operation is irreversible.
Request Syntax
cliq modifyRemoteAssociation login= userName= passWord= remote= remoteUserName=
remotePassWord= remoteBandwidth=
login
userName
passWord
groupName
remote
remoteUserName
remotePassWord
primaryBandwidth
remoteBandwidth
remotegroupname
Example
cliq modifyRemoteAssociation login=10.0.1.2 userName=admin
passWord=secret remote=10.0.1.3 remoteUserName=admin
remotePassWord=secret remoteBandwidth=10Mb
cliq modifyRemoteAssociation remote=10.0.1.3 remoteUserName=admin
remotePassWord=secret remoteBandwidth=10Mb
Required Enable or disable the fibrechannel port(s). This can be one of: 0 -
disable, 1 - enable. Default is 0. If a WWPN is entered, this value
will stay at its default value of 0 unless specifically set by using this
parameter.
Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The IP address or DNS-resolvable names of one or more remote storage
system
Optional The authentication user name for the remote group
Optional The password for the remote group
Optional The bandwidth used in a copy from the primary group to the remote
group. Kb = Kilobits/sec (1000 Bits/second), Mb = Megabits/sec
(1000 Kilobits/second), Gb = Gigabits/sec (1000 Megabits/second)
Optional The bandwidth used in a copy from the remote group to the primary
group. Kb = Kilobits/sec (1000 Bits/second), Mb = Megabits/sec
(1000 Kilobits/second), Gb = Gigabits/sec (1000 Megabits/second)
Optional The name of the remote management group.
HP Lefthand CLI | Commands | 75