Createsnapshot; Createsnapshotschedule - HP StoreVirtual 4000 User Manual

Lefthand storage command-line interface user guide
Hide thumbs Also See for StoreVirtual 4000:
Table of Contents

Advertisement

createSnapshot

This command creates a snapshot of one or more SAN/iQ volumes.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq createSnapshot volumeName= snapshotName= login= userName= passWord=
userName
passWord
groupName
volumeName
snapshotName
description
inheritAccess
Example
cliq createSnapshot volumeName=volume0;volume1
snapshotName=snapshot0;snapshot1 login=10.0.1.2 userName=admin
passWord=secret
cliq createSnapshot volumeName=volume0;volume1
snapshotName=snapshot0;snapshot1

createSnapshotSchedule

This command creates a local or remote snapshot schedule.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq createSnapshotSchedule scheduleName= description= starttime= recurperiod=
volumeName= remoteVolume= retentioncount= login= userName= passWord=
34 |  HP Lefthand CLI |    Commands
login
Required
Conditional
Conditional
Conditional
Required
Required
Optional
Optional
managed
Optional
wait
Optional
The IP addresses or DNS-resolvable names of one or more storage
systems
The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
The name of the volume
The name of the remote snapshot
Optional description
0 - the snapshot will not inherit the volume list, authentication group,
ACL relationships of the original volume (default)1 - the snapshot will
inherit the volume list, authentication group, ACL relationships of the
original volume
0 - the snapshot(s) will not attempt to use VSS on the host connected to
the volume (default)1 - the snapshot(s) will attempt to use VSS on the
host connected to the volume
Whether to wait for application managed snapshot process to complete
or not . This can be one of: 0 - don't wait, 1 - wait for it to complete
(default)

Advertisement

Table of Contents
loading

Table of Contents