Createserver - HP StoreVirtual 4000 User Manual

remoteCluster="10.0.1.21"
cliq createRemoteSnapshot primarySnapshot=Snapshot0
remoteSnapshot=Snapshot0 remoteVolume=Volume0
remote=10.1.2.4 remoteUserName=admin remotePassWord=secret

createServer

This command creates a representation of a client server in a management group. This "server" can be
associated with iSCSI or FibreChannel initiators and be granted access to volumes.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq createServer serverName= useCHAP= initiator= login= userName= passWord=
userName
passWord
groupName
serverName
description
allowiSCSIAccess
vipLoadBalance
targetSecret
chapName
initiatorSecret
controllingserver
allowfcaccess
32 | HP Lefthand CLI | Commands
login Required
Conditional
Conditional
Conditional
Required
Optional
Optional
Optional
useCHAP Optional
initiator Optional
Optional
Optional
Optional
Optional
Optional
remoteUserName=admin remotePassWord=secret
description="Exchange DB-1"
remoteCluster="10.0.1.21"
The IP addresses or DNS-resolvable names of one or more storage
systems
The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
The name of the server
Optional description
Allow iSCSI access for this host. This can be one of: 0 = disable or 1 =
enable. If volumes are attached to a client server via iSCSI and a value
of 0 is entered, the client server will lose its ability to communicate with
the attached volumes. If an IQN is entered and FibreChannel is NOT
configured, the default will be 1, otherwise no default will be selected.
Use VIP load balancing for this host. This can be one of: 0 = disabled
or 1 = enabled, 1 is the default.
Use CHAP Authentication this host. This can be one of: 0 = disabled or
1 = enabled.
A semicolon delimited string of host IQN's. Valid characters are any
letter, number, international character or '-', '.' and ':' characters.
The CHAP target secret for the volume.
The CHAP name for the volume. If this is not specified, the IQN of
the local server is used (this parameter is required if run on a storage
system).
The CHAP initiator secret for the volume.
Enter the IP address of the client server that has Application Aware
Snapshot Manager (AASM) installed on it. It will coordinate the
snapshot with the applications using SAN volumes. This is required
for managed snapshots of FibreChannel connected volumes. This is
also required for VMware managed snapshots, enter the Virtual Center
Server IP address.
Allow FibreChannel ports to be assigned to the client. This can be one
of: 0 = disable or 1 = enable. If volumes are attached to a client server