Clearvssvolumeflags; Clonesnapshot - HP StoreVirtual 4000 User Manual

clearVssVolumeFlags

This command resets snapshot flags in the vss volume. This command is only supported for Windows Server
2008 and higher.
Availability: Windows
Version: 8.5
Request Syntax
cliq clearVssVolumeFlags volumeName=
volumeName
Example
cliq clearVssVolumeFlags volumeName=x:

cloneSnapshot

This command creates one or more SmartClone volumes from a SAN/iQ snapshot. These SmartClone
volumes have all the functionality of normal volumes.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq cloneSnapshot snapshotName= volumeName= login= userName= passWord=
userName
passWord
groupName
snapshotName
volumeName
description
Example
cliq cloneSnapshot snapshotName=Snapshot1
volumeName=MyClone1;MyClone2 login=10.0.1.2 userName=admin
passWord=secret
cliq cloneSnapshot snapshotName=Snapshot1
volumeName=MyClone1;MyClone2
24 | HP Lefthand CLI | Commands
Required The name of the volume
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The name of the remote snapshot
Required The name of the volume
Optional Optional description