Makeremote; Modifyadmingroup - HP StoreVirtual 4000 User Manual

Example
cliq makePrimary login=10.1.2.3 userName=admin passWord=secret
volumeName="TheVolume" size=1GB
cliq makePrimary volumeName="TheVolume" size=1GB

makeRemote

This command demotes a primary volume to a remote snapshot target.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq makeRemote login= userName= passWord= volumeName= snapshotName=
userName
passWord
groupName
volumeName
snapshotName
Example
cliq makeRemote login=10.1.2.3 userName=admin passWord=secret
volumeName="TheVolume" snapshotName="TheSnapshot"
cliq makeRemote volumeName="TheVolume" snapshotName="TheSnapshot"

modifyAdminGroup

This command modifies one or more properties of the SAN administrative group.
Availability: Windows, SAN/iQ
Version: 8.0
Warnings
If the adminUserName parameter is used, all user ids that are currently in the group that are not
included with this parameter will be removed.
Request Syntax
cliq modifyAdminGroup login= userName= passWord= description= adminGroupName=
adminUserName= permissions=
70 | HP Lefthand CLI | Commands
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The name of the volume
Required The name of the remote snapshot
login Required The IP addresses or DNS-resolvable names of one or more storage
systems