Configureraid; Connectvolume - HP StoreVirtual 4000 User Manual

configureRaid

This command reconfigures the RAID setting on a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq configureRaid configuration= login= userName= passWord=
login
userName
passWord
groupName
configuration
Example
cliq configureRaid configuration="RAID 10" login=10.0.1.2
userName=admin passWord=secret
cliq configureRaid configuration="RAID 10"

connectVolume

This command connects an already present array volume to an application server host.
Availability: Windows
Version: 8.0
Request Syntax
cliq connectVolume volumeName= login= userName= passWord=
login
userName
passWord
groupName
volumeName
initiatorport
persistent
Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The RAID type to set. The possible RAID levels are reported with the cliq
getNsmInfo command.
Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The name of the volume
Optional The initiator port number.
Optional Automatically restore iSCSI connection when the computer starts up.
HP Lefthand CLI | Commands | 25