Example
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4
discoverUdp
This command discovers storage systems and management groups on the network, using UDP.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq discoverUdp ipMask= ipSubnet=
ipMask
ipSubnet
groupOrder
receivePort
waitForData
Example
cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0
cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0
dismountVolume
This command dismounts the volume.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq dismountVolume mountPoint=
mountPoint
Example
cliq dismountVolume mountPoint=5
cliq dismountVolume mountPoint=5
Required
An IP adderss mask for SNMP notification.
Required
An IP Address subnet for SNMP notification.
Optional
Return storage systems ordered by group membership. This can be one
of: 0 - default, 1
Optional
The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
Optional
The number of milliseconds to wait for the discovery packets (defaults to
3000 if unspecified)
Required
The drive letter or mount point on the host for the volume (LUN will be
uninitialized if not specified)
HP Lefthand CLI | Commands | 49